LaserWork sous Wine (linux)

Avatar de l’utilisateur
.vince
Messages : 1354
Inscription : 18 févr. 2014, 10:41

LaserWork sous Wine (linux)

Message par .vince »

romain.f a écrit :Geoffrey, j'ai essayé d'installer l'appli sous Wine, sans succès !
La solution pour installer Laserwork sous Wine : http://stefan.schuermans.info/rdcam/wine.html
LaserWork on Wine

The RDCAM version 6 software package delivered with the laser cutter contains a standalone laser cutting program called LaserWork (version 6). I have been able to install this program on Windows 7, but it could not find the laser cutter device. As the computer in the workshop was anyways running Linux due to other machines controlled by it, I made LaserWork run on Wine.

Linux PC

The Linux PC running Wine and LaserWork has got an Intel Core2 Quad and 4GB of main memory. A standard desktop installation of Debian Wheezy (x86_64 with i386 support) is used as operating system. The Wine version is 1.4.1.
Direct FTDI Driver

RDCAM uses the direct FTDI driver D2XX to communicate with the FTDI chip in the controller via USB. Therefore, the Linux version of the D2XX driver has to be installed. I installed version 1.1.12 of the driver for both i386 and x86_64 architectures.

Allowing Users to Use FTDI Devices

The device files in /dev/ are usually created without read/write permissions for ordinary users. To change that, create a file called /etc/udev/rules.d/99-ftdi.rules with the folling contents:

SUBSYSTEM=="usb", ATTR{idVendor}=="0403", ATTR{idProduct}=="6001", MODE="0666"

Wine Support for FTD2XX.DLL

As the LaserWork/RDCAM software runs under Wine, support for the FTD2XX.DLL has to be enabled by redirecting API calls to the native Linux library. Fortunately, the work of creating a wrapper library had already been done. So I could install the ftd2xx.dll.so file in /usr/local/lib32. Finally, I created a symbolic link to this file in /usr/lib/i386-linux-gnu/wine/, so that Wine is able to find the D2XX wrapper library when a Windows program wants to load FTD2XX.DLL.

Installing LaserWork on Linux

To make LaserWork run on Luinux under Wine, just copy the LaserWork installation directory to Linux. Afterwards, rename FTD2XX.DLL in this directory to FTD2XX.DL_ to make sure that wine uses the wrapper of the D2XX Linux driver and not the windows driver.
Avatar de l’utilisateur
.vince
Messages : 1354
Inscription : 18 févr. 2014, 10:41

LaserWork sous Wine

Message par .vince »

.vince a écrit :
romain.f a écrit :Geoffrey, j'ai essayé d'installer l'appli sous Wine, sans succès !
La solution pour installer Laserwork sous Wine : http://stefan.schuermans.info/rdcam/wine.html
Quelqu'un a essayé ?
PMorel
Messages : 3749
Inscription : 04 déc. 2013, 22:44
Localisation : Yutz

Re: Formation à la découpe laser

Message par PMorel »

Non ...
romain.f
Messages : 436
Inscription : 21 janv. 2015, 18:50
Localisation : Yutz

Re: Formation à la découpe laser

Message par romain.f »

Pas eu le temps...

Envoyé de mon GT-I9506 en utilisant Tapatalk
Avatar de l’utilisateur
.vince
Messages : 1354
Inscription : 18 févr. 2014, 10:41

Re: Formation à la découpe laser

Message par .vince »

Si vous avez 2 min, essayez de copier le dossier de laserworks sur un os linux et lancer le programme avec wine.
Chez moi j'ai un retour à la ligne direct sans message d'erreur.
ntrs
Messages : 1628
Inscription : 20 févr. 2014, 14:15
Localisation : rond point merlin,Thionville
Contact :

Re: Formation à la découpe laser

Message par ntrs »

en attendant les softs adéquat on pourrait tourner windows sous VM
Avatar de l’utilisateur
.vince
Messages : 1354
Inscription : 18 févr. 2014, 10:41

Re: Formation à la découpe laser

Message par .vince »

Y'en a qui ont vu des gars qui ont dit qu'ils ont vu un type qui l'a fait marché avec wine.
Si ça vaut pas le coup de creuser la question...
bricolman
Messages : 103
Inscription : 26 déc. 2014, 13:00
Localisation : Cattenom

Re: Formation à la découpe laser

Message par bricolman »

Combien de litres de Wine ces gars ont ils bu?
En principe avec trop de Wine , tu ne marches plus.
JJ
ntrs
Messages : 1628
Inscription : 20 févr. 2014, 14:15
Localisation : rond point merlin,Thionville
Contact :

Re: Formation à la découpe laser

Message par ntrs »

OBEI WINE KENOBI ?
Avatar de l’utilisateur
.vince
Messages : 1354
Inscription : 18 févr. 2014, 10:41

Re: LaserWork sous Wine (linux)

Message par .vince »

Une belle bande de win(n)ers...
Répondre